"INSTALL AND RIDE, EFI MADE EASY."
The EJK (Electronic Jet Kit) evolved out of the need to address the ever-increasing complexity of factory fuel injection. For the newcomer to the market or professionals wanting an easier method for tuning fuel injection, the EJK is a customizable solution for the shop that wants to take control of their tuning needs.
- No computer needed
- No dyno required
- Quick "plug and play" installation, initial settings are all preset based on make/model
- Full range tunability, does not interfere with stock ECU
- Simple push button adjustment interface
- 2 year warranty
The GEN 3 is a piggy-back EFI controller because it does not replace the stock ECU, but rather monitors the signals to the injectors and makes fuel adjustments based on the mode settings. The GEN 3 has a push button interface allowing access up to 6 different modes to allow for quick fine tuning by the end user without needing a computer. The GEN 3 also is nitrous oxide compatible, and allows the user to add fuel thru the stock fuel injection when using nitrous oxide.
The GEN 3.5 EFI controller is an extension to the GEN 3 controller. The GEN 3.5 controller has the ability to add or pull fuel within each available fueling zone. The GEN 3.5 is NOT compatible with nitrous oxide systems.
Not legal for use in California on pollution controlled vehicles, race use only in California - waiver available
* Must disconnect or bypass O2 sensors, wiring included if needed
Prop 65 - WARNING Item may contain compounds or chemicals known to the State of California to cause cancer and reproductive harm.