Adding to an already strong arsenal of off-road motorcycle outdoor lifestyle products in our DIRT Series collection, we bring you the Surface jacket.

Stretch and safety for days

The impetus behind its creation was to engineer a jacket with as much stretch as possible using an open-knit construction, in this case, PWR|Stretch, to maximize comfort when moving around. CORDURA ripstop was then added to reinforce its structural stability, along with the inclusion of SEESMART armor at the elbows and shoulders (with the possibility to add the back protector if desired) to give it a AA safety rating.

One with nature

When searching for your next adventure in the heart of nature, know that what has come before has been used again. The parts that are lined on the inside of the Surface jacket has been made with recycled polyester. Roam free, explore more, and enjoy every moment.

This product contains recycled polyester:

Inner liner of outer garment contains 22% recycled polyester

• Protection: Prepared for SEESOFT CE-level 2 Insert Back Protector The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
• Ventilation: Perforation on upper front
• Protection: SEESMART CE-level 1 Elbow Protectors
• Protection: SEESMART CE-level 1 Shoulder Protectors SEESMART shoulder protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.
• Visibility: Laminated reflection at upper arms Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
• Visibility: Laminated reflection on back Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.
• Pockets: Inner pocket
• Fit: Regular fit The Regular fit is designed for comfortable wear, and its tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.
• Protection: Thumb loops
• Adjustability: Adjustment drawcord at hem
• Visibility: Laminated reflection at collar Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
• Pockets: Slit pocket at back A slit pocket at the lower back allows for easily accessible storage of personals where it doesn't interfere with the rider.
• Features: Stretchable cuff
• Outer shell material: CORDURA 750D ripstop CORDURA with ripstop properties.
• Pockets: Two slit pockets at waist
• Pockets: Chest pocket
• Features: Thumb loop
• Features: Full stretch Full stretch in this garment allows for maximum freedom of movement and wearer comfort.
• Protection: Ready for Avertum Tech-Air airbag system - ONE SIZE UP Under this garment you can wear our REV'IT! Avertum Tech-Air Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
• Sustainability: Vegan
• Sustainability: Lining made with recycled polyester
• Outer shell material: PWR|Shell breathable stretch No coating at back for more breathability and open structure but not as open as a mesh - still allowing more fresh air in.

PROP 65 WARNING: Cancer and/or reproductive harm - www.P65Warnings.ca.gov